ComparisonJun 7, 2026·11 นาทีในการอ่าน

เปรียบเทียบเครื่องพิมพ์ใบเสร็จ Bixolon: SRP-350III vs SRP-330III vs SRP-Q300 (และอะไหล่ที่สึก)

คู่มือเปรียบเทียบเครื่องพิมพ์ใบเสร็จ SRP ของ Bixolon — รุ่นเรือธง SRP-350III, รุ่นคุ้มค่า SRP-330III และรุ่นกะทัดรัด SRP-Q300 — วิธีเลือกตามความเร็ว ความทนทาน และพื้นที่วาง พร้อมอะไหล่หัวพิมพ์และใบมีดตัดที่ต้องจัดหา

ตัวช่วยเลือกอย่างเร็ว

Bixolon’s SRP receipt printers are popular value picks, but the three you’ll weigh up serve clearly different roles. Match the model to the lane:

If you need…ChooseWhy
High volume, longest lifeSRP-350IIIHigher printhead & ~1.8M-cut autocutter endurance
Best value 80 mm tillSRP-330IIISame speed/dpi, lower cost, ~1.5M-cut cutter
Compact / tablet / mPOSSRP-Q300Ultra-compact cube, front exit, Android/iOS/Windows
All print 80 mm receipts fast; the split is endurance (350III) vs value (330III) vs footprint (Q300).

กลุ่ม SRP ของ Bixolon

The SRP family decoded into the role each model plays:

ModelFormatRole
SRP-350IIIThermal 80 mmHigh-endurance flagship for busy lanes
SRP-330IIIThermal 80 mmValue workhorse for normal volume
SRP-Q300Thermal 80 mm, compactCube for tablet/mPOS & tight counters
SRP-350plusVThermal 80 mmEstablished workhorse variant
SPP mobile seriesThermal mobilePortable / on-the-go printing
The SRP range covers a flagship, a value model, a compact cube and mobile units. This guide focuses on the three desktop mainstays.

SRP-350III vs SRP-330III vs SRP-Q300

Side by side, the three desktop models line up like this:

SRP-350IIISRP-330IIISRP-Q300
TierFlagshipValueCompact cube
Speedup to ~250 mm/sup to ~250 mm/sup to ~220 mm/s
Resolution180/203 dpi180/203 dpi203 dpi
EnduranceHighest (head + ~1.8M cuts)~150 km head, ~1.5M cutsCompact-duty
FootprintStandardStandardSmallest (front exit)
Best forHigh-volume lanesEveryday tillsTablet/mPOS, tight space
Speed and dpi are similar across the 350III and 330III; endurance and footprint are the real deciders. Specs vary by configuration.

ความทนทาน: ค่าหัวพิมพ์และใบมีดตัด

The clearest reason to pay more for the SRP-350III is endurance — how long the two wear parts last before replacement. Over a busy printer’s life, that difference shows up as fewer head and cutter swaps:

Endurance: SRP-350III vs SRP-330IIIAutocutter (cuts)350III ~1.8M330III ~1.5MPrinthead life350III higher330III ~150 kmMore receipts and cuts per part = fewer service visits on a high-volume laneFigures are manufacturer-published ratings; confirm against the current datasheet.
Endurance, not speed, separates the flagship from the value model: the SRP-350III is rated for a higher printhead life and more autocutter cuts.

The practical takeaway: on a lane that prints all day, the SRP-350III’s higher ratings mean longer intervals between printhead and cutter replacements, which can offset its higher purchase price. On a quieter till, the SRP-330III’s endurance is more than enough.

เลือกตามรูปแบบใช้งาน

A short path from your counter to the right SRP:

  1. 1

    Tablet or tight on space?

    Running a tablet/cloud POS or short on counter room? The compact front-exit SRP-Q300 fits where a full-size printer won’t.
  2. 2

    How busy is the lane?

    High daily volume and long peaks? The SRP-350III’s higher head and cutter endurance pays back in fewer part swaps. Moderate volume? The SRP-330III.
  3. 3

    Confirm the interface

    Make sure the model/configuration offers the connection your POS needs (USB, serial, parallel or Ethernet). The interface is part of the config code.
  4. 4

    Note the exact model + revision

    Record the full model and revision (e.g. SRP-350III vs a plus variant) — it determines which printhead and cutter you’ll order later.
A quick decision path from your setup to the right Bixolon SRP model.

อะไหล่สิ้นเปลืองที่ต้องเปลี่ยน

Bixolon printers are long-lived because the wear parts are replaceable. Match each to the exact model and revision:

PartSymptom / note
Thermal printheadFaint or missing dots; model-specific (350 vs 330)
AutocutterJams or won't cut cleanly
Platen rollerFeed problems, smudging, uneven print
Power supplyDead / intermittent — see PSU guide
Interface module/cableConnects but won't print — see interface guide
Faint print = head; won't cut = cutter; feed issues = roller. Confirm the part against your exact SRP model and revision.

Browse Bixolon printers and spares in our Bixolon printer & accessories category, printheads in thermal print heads, and other models in POS printers. For replacement technique and connectivity, see our printhead replacement and printer interface guides. Tell us your exact SRP model and revision and we’ll match the right part.

คำถามที่พบบ่อย

Bixolon SRP-350III กับ SRP-330III ต่างกันอย่างไร?
ทั้งคู่เป็นเครื่องพิมพ์ใบเสร็จความร้อน 80 มม. (3 นิ้ว) พิมพ์ได้ถึง 250 มม./วินาที ที่ 180/203 dpi แต่ SRP-350III เป็นเรือธงทนทานกว่า ขณะที่ SRP-330III เป็นตัวเลือกคุ้มค่า SRP-350III มีค่าอายุหัวพิมพ์และใบมีดตัดสูงกว่า (ราว 1.8 ล้านครั้ง) จึงเหมาะกับเลนปริมาณมาก; SRP-330III (ราว 150 กม. ของหัวพิมพ์ และ 1.5 ล้านครั้ง) เป็นตัวเลือกคุ้มค่าสำหรับปริมาณค้าปลีกปกติ
SRP-Q300 คืออะไรและเหมาะกับใคร?
SRP-Q300 เป็นเครื่องพิมพ์ใบเสร็จ 'คิวบ์' กะทัดรัดสุดของ Bixolon กระดาษออกด้านหน้า ออกแบบให้ใช้พื้นที่เคาน์เตอร์น้อยที่สุด พิมพ์ได้ถึง ~220 มม./วินาที และเข้ากันได้กับ Android, iOS และ Windows จึงเหมาะกับการตั้งค่า POS แท็บเล็ตและมือถือ (mPOS) เลือกเมื่อพื้นที่เคาน์เตอร์จำกัดหรือ POS รันบนแท็บเล็ต แทน SRP-350/330 เต็มขนาด
เลนยุ่งปริมาณมากควรใช้เครื่องพิมพ์ Bixolon รุ่นใด?
SRP-350III ความทนทานหัวพิมพ์ที่สูงกว่าและใบมีดตัด ~1.8 ล้านครั้งสร้างมาเพื่อการพิมพ์ปริมาณมากต่อเนื่อง จึงอยู่ได้นานกว่าระหว่างการเปลี่ยนอะไหล่ภายใต้ภาระรายวันหนัก แคชเชียร์เดียวที่เงียบกว่าเหมาะกับ SRP-330III ที่ประหยัดกว่า; เก็บเรือธงไว้สำหรับเลนที่พิมพ์ทั้งวัน
หัวพิมพ์ Bixolon SRP-350 และ SRP-330 ใช้แทนกันได้ไหม?
ถือว่าเฉพาะรุ่นและยืนยันด้วยหมายเลขอะไหล่ — ตระกูล SRP-350 และ SRP-330 ใช้ชุดหัวพิมพ์และใบมีดตัดของตัวเอง และยังมีเรฟวิชันย่อย (เช่น รุ่น plus และ III) ในแต่ละสาย อย่าสมมติว่าหัวจากรุ่นหนึ่งใส่อีกรุ่นได้ จับคู่อะไหล่กับรุ่นและเรฟวิชันที่แน่นอน และอ้างรหัสอะไหล่/คอนฟิกเต็ม
เครื่องพิมพ์ Bixolon SRP มีอินเทอร์เฟซอะไรบ้าง?
ตลอดกลุ่ม SRP จะพบ USB, ซีเรียล, พาราลเลล และอีเทอร์เน็ต (LAN) ตามรุ่นและรหัสคอนฟิก และ SRP-Q300 กะทัดรัดเพิ่มความเข้ากันได้ของ OS กว้างสำหรับแท็บเล็ต เนื่องจากอินเทอร์เฟซเป็นส่วนหนึ่งของคอนฟิกรุ่น ยืนยันรุ่นย่อยที่ต้องการ (หรือที่มี) ก่อนสั่งตัวเปลี่ยน — ดูคู่มืออินเทอร์เฟซของเราเพื่อเลือกหรือเปลี่ยนการเชื่อมต่อ
อะไหล่ใดสึกบนเครื่องพิมพ์ Bixolon?
หัวพิมพ์ความร้อนและใบมีดตัดอัตโนมัติเป็นอะไหล่สิ้นเปลืองหลัก ตามด้วยลูกกลิ้งยาง หัวที่พิมพ์จางหรือจุดหายเป็นสาเหตุปกติของงานพิมพ์แย่; ใบมีดตัดที่ติดหรือไม่ตัดเป็นลำดับถัดมา; ลูกกลิ้งมีผลต่อการป้อนและคุณภาพ เปลี่ยนได้ทั้งหมด — จับคู่แต่ละชิ้นกับรุ่น SRP และเรฟวิชันที่แน่นอน ไม่ใช่แค่ชื่อตระกูล

แหล่งข้อมูลและการอ่านเพิ่มเติม

  1. Bixolon SRP-350III Thermal Receipt Printer (specs)Bixolon
  2. Bixolon SRP-330III Thermal Receipt Printer (specs)Bixolon
  3. Bixolon SRP-Q300 Compact Cube Receipt PrinterBixolon America
  4. Bixolon SRP-350III Receipt Printer OverviewPOSGuys
  5. Bixolon Printer Printheads & PartsTouchWindow

คู่มือที่เกี่ยวข้อง

Comparison·11 นาทีในการอ่าน

เปรียบเทียบเครื่องพิมพ์ใบเสร็จ Star Micronics: TSP100, TSP650, TSP700, TSP800 และ SP700 แบบกระแทก

กลุ่มเครื่องพิมพ์ใบเสร็จของ Star ตั้งแต่เครื่องพิมพ์แคชเชียร์ USB ราคาประหยัด ไปจนถึงเครื่องพิมพ์ตั๋วความเร็วสูง และเครื่องพิมพ์ครัวแบบกระแทกทนความร้อน นี่คือการเปรียบเทียบกลุ่มผลิตภัณฑ์ พร้อมอะไหล่ที่ต้องใช้

อ่านคู่มือ
Comparison·13 นาทีในการอ่าน

เครื่องพิมพ์ POS แบบดอตเมทริกซ์ vs ความร้อน: การเปรียบเทียบต้นทุนรวมในการเป็นเจ้าของสำหรับค้าปลีกและร้านอาหาร

เครื่องพิมพ์ความร้อนครองพื้นที่หน้าร้านมาหลายทศวรรษ แต่ดอตเมทริกซ์ยังคงเป็นคำตอบที่ถูกต้องสำหรับครัว แบบฟอร์มหลายชั้น และสภาพแวดล้อมร้อน นี่คือกรอบในการเลือกอย่างถูกต้องในขนาดใหญ่

อ่านคู่มือ

หมวดหมู่ที่เกี่ยวข้อง

อะไหล่แนะนำ

ต้องการอะไหล่ที่กล่าวถึงในคู่มือนี้หรือไม่?

อะไหล่ OEM ของแท้และอะไหล่ทดแทนคุณภาพระดับโรงงานสำหรับระบบ IBM, Toshiba, NCR, Diebold, Wincor และ Hyosung — จัดส่งทั่วโลก